1 Identifying device
2 Free sample file
3 Installation of speed cameras
4 Updating speed cameras
5 Removing speed cameras
6 Frequently asked questions


Hi there.

Are you a native speaker? Would you be willing to help us?
We are very appreciative of translations, proofreading or pictures/screenshots to help optimize our installation guide. Or any other advice.
Please don't hesitate to write us an email: Thanks in advance.


1 Identifying device

  1. Suzuki SLDA (Smartphone Linkage Display Audio Systems) and Suzuki SLN (Smartphone Linked Navigation) appear quite similar. To distinguish between them, please follow these steps:

    Check your device: Go to System Settings > Data Carrier Version to identify your specific device. This image provided depicts a Suzuki SLN device:

  2. Both Suzuki SLDA and SLN require a minimum software version of 1850. To verify your software version, follow these steps: While in radio mode, press and hold the Settings button for 30 seconds to access the software version.
    If you are searching for the Suzuki Bosch SLDA software update 1880, you can click here and utilize Google Translate (recommended) for further assistance.


2 Free sample file

  1. The free sample file for UK and Ireland allows you to test if POI files can be installed on your navigation device.
    Install sample file according to this installation guide.

    Download sample file

    Try before purchase. Refund excluded after download started of full database.


3 Installation of speed cameras

  1. Sign in to
    Go to produkt page for Suzuki SLDA / SLN.
    We offer only data of fixed speed cameras.

  2. Make your decision on the download page.
    Use preselection on the left or country list on the right.
    Press CTRL key for multiple choice.

  3. In step 2 is only one option.
    The option All safety cameras in one category lets you download the data in a single file.

    Note: Unfortunately we can not influence the icons. They are specified by the navigation software.

  4. Press button Download Now.
    Save file on your hard disc.

    Note: In most cases, the file is saved directly to the download folder of the computer.
    Depending on your browser settings, sometimes you can choose the save location by yourself.

  5. Unpack the zip file.

    Unpacking on a Windows computer: right-klick on the zip file > Extract all...
    Unpacking on a Mac Computer: double-klick on the zip file.

  6. The file will automatically be decompressed into the folder suzuki-slda.

    Note: The CSV file is displayed with an Excel icon if you have installed Microsoft Excel in your computer.
    No reason to worry! You should not open the file with Excel though because the file format then can become corrupted and the file unusable.

  7. Connect USB flas drive to the computer.
    You need to format the USB stick before you can use it. Format in FAT32 (not: FAT or exFAT).
    Remove check mark from Quick Format.
    This step is strictly recommended!

    Note: Bosch devices are obviously very picky about USB flash drives. We recommend to use older USB 2.0 flash drives.
    Always try various sticks in case of any issue.

  8. Create required folder structure on the USB stick.

    for SLDA devices:
    Create folder myPoiWarnings.

    for SLN devices:
    Create folder myPOIs.
    Open folder myPOIs.
    Create subfolder myPoiWarnings.

    Attention: Correct spelling of folder names is very important!
    Do not use spaces and pay special attention to upper and lower case.

  9. Copy and paste the CSV file from folder suzuki-slda into folder myPoiWarnings.

    For SLDA devices the USB stick should look like that:

    For SLN devices the USB stick should look like that:

  10. Turn on the ignition.
    Start navigation app.

  11. Connect USB stick to navigation device (USB slot-is placed in the center console).

  12. The navigation device detects new POIs on the USB stick.
    Click Download.

  13. New POIs are loaded into the navigation device.
    Wait until the message: Download successful.

    Do you have some pictures for us? (in your language)
    Would you like to improve our translations? We are very appreciative of your help. Please help us optimize our installation guide.
    Don't hesitate to send us an email any time: Thanks in advance.

  14. Click setting icon and go to Settings > My POIs > POI warning.
    Select On and beep (recommended).

    Do you have the next picture in your language?
    We are very appreciative of your help. Please send us an email to Thanks in advance.

  15. Warning is shown on top of the screen when navigation is active.
    Speed camera appears with an icon in the map. The icon can not be changed.
    If navigation is not active, you only hear a beep.

    Slight beep appears nearly 250 meters before passing the POI.
    The beep is not adjustable, neither in volume nor in frequency.
    The aucoustic warning is controlled by software of the navigation device. We can not influence it with the POI file.
    The displayed description texts are not available in English.

    Do you have the next picture in your language?
    We are very appreciative of your help. Please send us an email to Thanks in advance.


4 Updating speed cameras

    If you would like to update speed cameras in your device later: Please repeat all steps of this guide.
    Recommendation: Update your speed camera data once a month.


5 Removing speed cameras

    If you want to delete speed cameras:
    Click setting icon.
    Go to Settings > My POIs > Delete MyPOIs.


6 Frequently asked questions

    We also recommend to visit the Frequently Asked Questions.
    In most cases, the solution to a problem can already be found here.